2200VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost/cut during brownouts/overvoltages to maintain regulated 120V nominal output over an input voltage range of 83-145V. Includes NEMA 5-20P input plug and 7 UPS-supported (6 x 5-15/20R & 1 L5-20R) output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network interfaces. Includes PowerAlert power management software and complete cabling. Three-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation, and battery warning LEDs. Audible alarm. Self-test. Field-replaceable, hot-swappable internal batteries. Attractive all-black color scheme.
SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line-interactive voltage regulation maintains selectable 120V nominal output during brownouts as low as 83V and overvoltages to 145V
Enables continuous operation through blackouts, voltage fluctuations and surges
Line-interactive automatic voltage regulation (AVR) provides 12% and 24% voltage boost during brownouts and a 12% voltage cut during overvoltages
Standard internal battery set offers 13 min. runtime at half load (800W) and 5 min. at full load (1600W)
Space-saving upright tower format
Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert power management software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, timed inverter shutoff, activate self-test and output power control
NEMA 5-20P input plug/6 x NEMA 5-15R and 1 x NEMA L5-20R output receptacles
Front panel LEDs provide current monitoring, voltage regulation, battery charge level, and battery warning information
UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
Package Includes SMART2200SLT UPS System, PowerAlert Software and cabling, Owner's manual
Battery recharge rate (included batteries):
Less than 4.5 hours from 10% to 90%
Voltage regulation description:
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83V to overvoltages to 145V
Overvoltage correction:
Input voltages between 127 and 145 are reduced by 12%
Undervoltage correction:
Input voltages between 96 and 108V are boosted by 12%
Severe undervoltage correction:
Input voltages between 83 and 95V are boosted by 24%
UPS AC suppression joule rating:
570
UPS AC suppression response time:
Instantaneous
EMI / RFI AC noise suppression:
Yes
UPS Shipping dimensions (height x width x depth):
14.5 x 13.8 x 18 inch
UPS housing material:
Steel
Cooling Method:
Fan
Storage Temperature Range:
-15 to +50 °
Relative Humidity:
0 to 95%, non-condensing
AC mode BTU / hr. (full load):
286.3
Battery mode BTU / hr. (full load):
885.6
Audible Noise:
< 50 dBA at Front Side 1 Meter
Transfer Time:
2-4 milliseconds
Low voltage transfer to battery power (setpoint):
83
High voltage transfer to battery power (setpoint):
145
UPS Certifications:
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Product Warranty Period with Registration:
3 Years
RoHS Compliant:
Yes
Cisco Compatible:
Yes
WEXT1H
- 1-Year Extended Warranty - For select Tripp Lite Products
WEXT2H
- 2-Year Extended Warranty - For select Tripp Lite Products