2-in 6-out Digital System Controller

Model: VNET SC1

Two balanced XLR analogue inputs and six balanced XLR analogue outputs
Simple configuration and optimisation of loudspeakers in terms of speaker management and room EQ functionality
Intuitive signal flow based interface and 2 x 24 character backlit LCD
Unique routing engine allows any input to be sent to any output.
Butterworth, Bessel, Linkwitz Riley and Hardman type filters are available on all outputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

A powerful '2 in 6 out' digital system controller, the VNET SC1 combines the functions of multiple conventional processing products into one compact 1U of rack space. Using DSP-based digital crossovers with 96kHz sampling rates this versatile, feature packed unit will enable simple configuration and optimisation of loudspeakers for superior audio quality within a fixed installation or touring situation. This is the standard VNET SC1 model, which acts as a straightforward system controller with crossover, EQ, Delay and Limiting functions.Note: A network enabled version of the VNET SC1 also comes equipped with two network ports allowing connection to any networked system using the other products in the VNET™ range.

Two balanced XLR analogue inputs and six balanced XLR analogue outputs
Simple configuration and optimisation of loudspeakers in terms of speaker management and room EQ functionality
Intuitive signal flow based interface and 2 x 24 character backlit LCD
Unique routing engine allows any input to be sent to any output.
Butterworth, Bessel, Linkwitz Riley and Hardman type filters are available on all outputs
Input and output gain is adjustable in 0.2dB steps from - 40dB to +15dB
Input delay adjustable in variable steps from 0 to 400ms, while output delay is adjustable to 80ms
Automatically calculated attack and release constants dependant on frequency
RS232 connector enables connection to a laptop computer or other PC for enhanced control functions using VNET™ software
Automatically adapting universal switch mode power supply - 85 to 240 volts
Applications:Fixed Installations, Touring Applications.

Equalizer Type - Loudness Equalizer
Equalizer Input Connector - XLR
Equalizer Output Connector - XLR
Spec Sheet available - Yes

Dynamic Range: 112 dB
Rack Units (Height): 1
Total Harmonic Distortion + Noise (THD+N): 0.01 %
AC Voltage: 250 Volts
Depth: 10 in
Height: 1.77 in
Width: 18.98 in
Product Weight: 5.95 lbs
Shipping Weight: 7 lbs
Color: Black
Impedance: 10000 ohm
Inputs: 2
Input Impedance: > 10k Ohm electronically balanced.
Maximum Input Level: 20dBu
Outputs: 6
Output Impedance: <100 Ohm, ground balanced
Maximum Output Level: 20dBu into 600 Ohm load
Sample Rate: 96kHz
Bit Depth: 24 bit
Frequency Response: 10Hz to 40kHz, /- 3dB (filters disabled) 20Hz to 20kHz, /- 0.5dB (filters disabled)
THD: <0.01%, ( 10dBu, 20Hz to 20kHz, 30kHz bandwidth)
Dynamic Range: >112dB (A weighted, 22kHz bandwidth) >109dB (un-weighted, 22kHz bandwidth)
Serial Comms Data: 38.4kbaud, format: 8 data, 1 stop, no parity
Processing:
Gain: 15dB to -40dB and mute, 0.2dB steps
Output Ch. Source: Input A, Input B and SUM
HP filter frequency: Off, 10Hz to 25.4kHz, 1/36 octave steps
LP filter frequency: 10Hz to 25.4kHz and off, 1/36 octave steps
LP / HP filter type: 12, 18 & 24dB/octave Bessel and Butterworth 12, 24 and 48dB/octave Linkwitz Riley 4th or 8th order Hardman
Delay: Input 400ms, output 80ms
Limiter: High performance limiter, adjustable threshold in 0.2dB steps, automatic time constants
Eq Frequency: 10Hz to 25kHz, 1/36 octave steps
Eq Gain: 15dB to -15dB, 0.2dB steps
EQ width: 5.0 to 0.1 octaves bandwidth, 1/36 octave steps
Connectors:
Audio Inputs: 3 pin female XLR
Audio Outputs: 3 pin male XLR
Serial Comms: Available via RS232 port
Network Comms: Yes
Mains: 3 pin IEC
Mains Power: Universal switch-mode PSU, 85v to 250v AC, 50 / 60Hz
Consumption: < 25watts

‘2 in 6 out’ digital system controller 502 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Digitalinx HDMI 2.0 Equalizer / Booster

by Liberty AV Solutions