Leveraging SCTLink technology, the RTK-MINI delivers power, video, USB and Ethernet from the conference table to the codec – all over a single CAT cable up to 100 meters, no configuration required. It also provides PoE for a connected touch panel.
Extends power, USB, HDMI + audio content, and Ethernet (PoE) over a standard CAT5e/CAT6 cable up to 100m.
Flexibility to power the modules from either the transmitter or receiver.
Table PoE support for Cisco Touch 10 Controller
Simple Plug & Play installation, no programming required.
All hardware-specific codec connection cables are included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide a CAT5e/CAT6 SCTLink™ Cable.
Includes:
RTK-MINI TX Module
RTK-MINI RX Module
RCC-H001-2.0M HDMI® Cable
RCC-H016-1.0M UTP Cable
RCC-C001-0.3M HDMI® Cable
RCC-C002-0.3M UTP Cable
WPS-12 Power Supply
USB cables
Warranty - Yes
Spec Sheet available - Yes
Power Out:
Passive PoE, 48VDC, 7W, Class-2, Mode B per IEEE 802.3af. Touch Panel Power. USB-A Output Power (each): 5VDC at 500mA continuous. Overload/short-circuit 1.25A max
Video Format:
HDMI, up to 4K 25/30 4:4:4. HDMI® embedded audio, HDCP up to v2.2
WPS-12™ Power Supply (Included):
Imperial Dims: H: 1.19 x W: 1.85 x D: 4.65-inch, Weight: 0.5 lbs/236g, Input: 100 to 240VAC, 47-63Hz, 1.45A Max, Output: 30VDC, 2A Max, Output Connector: 5.5mm x 2.5mm DC Barrel
USB Link:
USB/UVC 2.0 Uni-Directional USB-A (x2) and Micro-B: Receiver to Transmitter or Transmitter to Receiver. USB Tier Usage: 1 tier (hub) per linked set
RTK-MINI-TX™ Transmitter Module:
Imperial Dims: H: 1.39 x W: 7.28 x D: 4.48 Inch, Weight: 0.81 lbs/369g
RTK-MINI-RX™ Receiver Module:
Imperial Dims: H: 1.39 x W: 7.28 x D: 4.48 inch, Weight: 0.81 lbs/369g
Ethernet Connectivity (RTK-MINI-TX):
Single 10/100 Port with PoE. Ethernet Connectivity: 10/100 Three Port Layer 2 Ethernet Switch (one with PoE support)
Distances:
Up to 328 ft (100m) over a single CAT5e or CAT6 STP/UTP cable