DekTec Dual DVB-SPI Output Card

Model: DTA-102

High speed transport stream output, compliant to DVB-SPI (synchronous parallel interface) as defined in DVB BlueBook A010 rev 1 and EN50083-9
Support for external signal adapters
Clock rate from 0 to 13.5 MHz with software selectable clock source:
External clock input
On board clock generator

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DTA 102 is a PC-based solution that offers high speed TS output that is compliant to DVB-SPI standards as defined in DVB BlueBook A010 rev.1 and EN50083-9. It offers support for the use of external signal adapters and external clock input.

High speed transport stream output, compliant to DVB-SPI (synchronous parallel interface) as defined in DVB BlueBook A010 rev 1 and EN50083-9
Support for external signal adapters
Clock rate from 0 to 13.5 MHz with software selectable clock source:
- External clock input
- On board clock generator
Short circuit detection with LED indicator
8Mbytes on-board buffer
Hardware assisted NULL packet insertion
Packet sizes supported: 130, 188, 192 and 204 bytes; arbitrary size in raw mode
Transmit modes for adding 16 bytes to 188 byte packets and for invalidating last 16 bytes of 204 byte packets
Comes with free:
- Windows-XP/2k3/Vista and Linux device driver and software development kit for developing custom applications
- Example source code for stream player
Applications
- General purpose DVB-SPI output adapter for PC based applications generating an MPEG2 transport stream
- DTA-102 with DTC-300 StreamXpress: versatile MPEG2 transport stream test generator with 8 bit parallel LVDS or TTL (with DTT-01) output
- Laboratory test signal generator

Input/Output Board/Card Type - Audio
Input/Output Board/Card Type - Network
Input/Output Board/Card Type - Video
Warranty - Yes
Spec Sheet available - Yes

Physical Layer: DVB/SPI
DVB/SPI Connector: 25 pin sub-D
External Clock Connector: 50 ohm SMA
DVB/SPI Clock: 0 to 13.5 MHz
Transmit Bit Rate: 0 to 108 Mbit/s
Clock-Generator Resolution: <0.1 Hz
Transmit Bit Rate Stability: ± 10 ppm
Burst Mode On/Off: Yes
Packet Size in Bytes: 130, 188, 192 or 204 (Arbitrary packet size in raw mode)
Target-Adapter Power Supply: 5V, 2A
Warranty (Length/Type): 1 Year Limited
Current Draw: 2 Amps
DC Voltage: 5 Volts

Card 805 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Superior IP-based Digital Signage and Video Walls

by Matrox Video

SMPTE ST 2110 Uncompressed IP I/O Card

by AJA Video

Quad HDMI Capture Card, Passive

by Matrox Video