Audio Production Equipment : Amplifiers (Audio) : RDL, Radio Design Labs - RU-PA518

Power Amplifier 5 W Stereo / 18 W Mono

Series:

Model: RU-PA518

9 W RMS per Channel Stereo into 4 O
18 W RMS Mono into 8 O
Selectable Stereo or Bridged Mono
Selectable Built-In Peak Limiter
1/3 Rack, High-Density Rack Mounting

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The RU-PA518 features two modes of operation: stereo and bridged mono. Depending on the mode of operation, the RU-PA518 can deliver from 5 to more than 18 watts of RMS power at the output. In stereo mode, each of the two inputs feeds its respective left or right output. Front-panel level controls set the gain for both left and right channels. When the rear-panel switch is set to the bridge mode, the two inputs (A and B) are mixed together and fed to the output. In either the stereo or mono mode, an internal audio peak limiter may be turned on using a rear panel switch.

9 W RMS per Channel Stereo into 4 O
18 W RMS Mono into 8 O
Selectable Stereo or Bridged Mono
Selectable Built-In Peak Limiter
1/3 Rack, High-Density Rack Mounting
Front-Panel Control for 2 Inputs

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier

Inputs (2): Line level (+4 dBu nominal bal, -10 dBV nominal unbalanced)
Input Impedance: 20 k Ohms balanced bridging, or 10 k Ohms unbalanced
Input Connectors: Balanced on barrier block; Unbalanced on phono jack
Minimum Input Signal Levels: Balanced: -6 dBu for rated power; Unbalanced: -20 dBV for rated power
Maximum Input Signal Levels: Balanced: +20 dBu; Unbalanced: +6 dBV
Frequency Response: 20 Hz to 40 kHz (+/-1 dB, stereo mode,8 Ohms output @ 5 W RMS); 25 Hz to 40 kHz (+/-1 dB, stereo mode, 4 Ohms output @ 9 W RMS); 25 Hz to 30 kHz (+/-1 dB, bridge mono mode, 8 Ohms output @ 18 W RMS)
THD+N: < 0.05% below rated power (1 kHz); < 0.1% below 18 W RMS (50 Hz to 20 kHz)
Noise: < -85 dB below rated output
CMRR: > 55 dB (50 Hz to 120 Hz)
Crosstalk: < -60 dB (stereo mode, 1 kHz)
Output Power: Stereo Mode: > 5 W RMS per channel Into 8 Ohms; > 9 W RMS per channel into 4 Ohms; Mono Mode: > 18 W RMS into 8 Ohms
Power Requirement: GROUND-REFERENCED, 24 to 33 Vdc @ 1500 mA (RMS output) 1000 mA (Continuous music or voice)
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Shipping Weight: 1.85 lbs
Color: Black

D-SP1A - Decora-style Compact Active Loudspeaker, White

DB-SP1A - 2W 8Ohm Decora-style Loudspeaker, Black

DG-SP1A - 2W 8Ohm Decora-style Loudspeaker, Gray

DS-SP1A - 2W 8Ohm Decora-style Loudspeaker, Stainless Steel

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

FP-PA20 - Power Amplifier - 20 W 8 ohms

FP-PA20A - 20 W Mono Audio Amplifier, 70 V or 100 V

FP-PA20B - 20 W Mono Audio Amplifier 25 V

ST-PA18 - 18 Watt 8 ohms Audio Power Amplifier - STICK-ON series module

ST-PA2 - Utility Audio Amplifier - 2 Watt

ST-PA6 - Audio Power Amplifier - 6 Watt

Datasheet for Power Amplifier 5 W Stereo / 18 w Mono 382874 kb - Other

Project List

DRA-35R
RACK-UP DIN Rail Adapter

MB-1
Mounting Kit - RU, ST and TX Series

MB-2
Mounting Kit - RU and TX Series

RU-BR1
Mounting Bracket for RACK-UP Series

Find a Dealer

Find a Distributor

Suggested Products

30W, 2 Channel, In-Wall Addressable Bluetooth Amplifier

by Vanco International

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.