20W stereo power amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8ohms speakers. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.
Power amplifier with front-panel level control
Switch-selectable load impedance on rear panel
Unbalanced line input on RCA jack
Switch-selectable mono or stereo mode
Integral overload limiter with LED indicator
Limiter produces output level comparable to higher power amps
Mono mode switch sums left and right inputs
Includes worldwide power supply
Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Shipping Weight:
1.35 lbs
Noise:
< -70 dB (below 10W)
INPUT:
> 10kohms, -10dBV nominal on RCA jack, -13dBV minimum (for 10W out), +22dBV maximum
Gain:
Off to 32dB
Output:
Left and right, 10Wrms into 8ohms per channel or 8Wrms into 4ohms per channel, switch selectable output impedance
Frequency Response:
35Hz to 20kHz (At ±1.5dB, 10W)
Crosstalk:
< -68 dB ( at 1kHz)
Power supply current:
160mA (Idle), 1000mA (Maximum)
Case Dimensions (W X D):
5.75 x 5 in
Mounting Size:
1/3 rack width
Package dimensions:
9.5 X 7 X 2.25 in
EZ-MXA20
- 20 Watt Stereo Audio Mixer Amplifier with EQ
HD-PA35
- 35watt Power Amplifier with Power Supply, Low Impedance Output 4 Ohm or 8 Ohm