Signal Processing Systems : AV Input / Output Boards & Cards : Plura Broadcast, Inc. - RUB D1

Module Housing 19 inch 1RU and Housing for 2 Double Card Modules

The RUBIDIUM Series by Plura offers the highest amount of flexibility and comfort with its modular design. From comprehensive redundant systems all the way to affordable single module applications, find the housing design and price that project require.

Series: Rubidium

Model: RUB D1

RUB D1 is part of the RUBIDIUM SERIES 1 modular system which offers flexibility, future proof and longevity.
The RUB D1 is 1 RU 19” frame which can accommodate up to two modules.
The RUB D1 includes power supply and 8 digits display.
Hot Swappable with rear loading modules.
I/P & O/P connectors are a standard and part of the module.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

RUB D1 is part of the RUBIDIUM SERIES 1 modular system which offers flexibility, future proof and longevity.
The RUB D1 is 1 RU 19” frame which can accommodate up to two modules.
The RUB D1 includes power supply and 8 digits display.
Hot Swappable with rear loading modules.
I/P & O/P connectors are a standard and part of the module.
Uniform front design which offers four status LED’s and cut-outs for 4 keys and an identification button for each module.
RUB D1 Frame comes standard with temperature monitoring module.
The controller status is available over TC_link and the failure relay.
RUB D1 frame can be interconnected (via standard RLC connector) to facilitate data exchange between modules, affordable system expansion and upgrade-ability requirements.
Fail or error signals will be triggered by the failure relay contact at the RLC connection. Contact closure indicates a breakdown or programmed failure occurrence.
RUB D1 housing and each connected module equipped with their own relay. These relays are connected in parallel.
Each slot has its own ID address.
Modules can individually be configured (e.g. the time code and video modules, except the power supply modules), can be located by their addresses.
RUB D1 has a USB connector at the rear of the frame to provide local configuration capability using Plura configuration software.
Each connected module can be configured individually.

Input/Output Board/Card Type - Video
Rackmountable - Yes
TAA Compliant - Yes
Spec Sheet available - Yes

Active Power: 7 Watt
Current Draw: 0.60 Amps
AC Voltage (Maximum): 264 Volts
AC Voltage (Minimum): 90 Volts
Depth: 6.95 in
Height: 1.75 in
Width: 17.58 in
Product Weight: 4.41 lbs

Housing 1351763 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

1G AV over IP SDM Card

by Aurora Multimedia Corp.

4K/60fps 12G-SDI to USB plug-and-play external video capture device with loop-through, embedded and analog audio

by Magewell Electronics

4K/60fps HDMI-to-USB plug-and-play external video capture device with loop-through, embedded and analog audio

by Magewell Electronics