Single-beam infrared motion sensor sends alert signal when invisible beam is broken.
Sensing range: 3 to 50 feet (1 to 15m)
Light Source: Infrared LED, wavelength 940nm
LED Beam Spread Angle: Approximately ±10°
Built-in AGC control to filter out lighting disturbances.
LED indicator for power, signal strength, and alarm.
NO/NC relay (set by jumper, default is N.C.)
Screw terminal.
Connect to digital input or RJ45 sensor ports on an ENVIROMUX system. To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Max current consumption: Transmitter: 15mA @ 12VDC. Receiver: 30mA @ 12VDC.
Powered by the E-2D/5D/16D.
Includes mounting hardware.
IP65 enclosure.
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
-13 F
Depth:
3 in
Height:
1.19 in
Width:
1.94 in
E-16D
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16DEL
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,200,000 data log entries; 3,000 event log entries.
E-2D
- Small Enterprise Environment Monitoring System
E-5D
- Medium Enterprise Environment Monitoring System
E-5D-IND48VLT
- Industrial Medium Enterprise Environment Monitoring System, 48VDC Power
E-5D-INDLT
- Industrial Medium Enterprise Environment Monitoring System