Single-channel Low UHF Band Professional Wireless System

Model: UHF-3

Clear channel UHF operation for optimum interference-free performance in any application or locale
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Proprietary companding circuitry for an industry best 120dB dynamic range, and the clearest, most natural sound available
Tone Squelch™ for locking out potential interference

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

Single-channel Low UHF Band Professional Wireless System. Unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise. Audio mute switch allows convenient audio muting with the transmitter on. Battery status LED (red) indicator flashes once for battery ok, lights steady for low-battery alert. TX LED (green) indicator lights steady. Uses two AA alkaline or NiMH batteries. Rugged, all-metal housing. Choice of instrument or headworn/lavalier microphone bodypack transmitter. Audio mute switch allows convenient audio muting with the transmitter on. Bi-color LED status indicator, unit on (green), low-battery alert (orange). Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable. Uses two AAA alkaline or NiMH batteries.

Clear channel UHF operation for optimum interference-free performance in any application or locale
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Proprietary companding circuitry for an industry best 120dB dynamic range, and the clearest, most natural sound available
Tone Squelch™ for locking out potential interference
UHF-3 receiver with DigiTRU Diversity™ for maximum range and dropout protection, full LED indicators, 1/4-inch unbalanced and XLR balanced outputs, special circuitry for noiseless transmitter
On/off switching
UH-3 or UB-3 two transmitters

Wireless Receiver Transmission - UHF
Wireless - Yes

DC Voltage: 18 Volts
Reception Mode: DigiTRU Diversity™
Squelch: External control, tone key (30.720kHz)
Controls: Power on/off, volume control, squelch (mute) adjust
Connectors: DC in, 1/4-inch (6.3mm) unbalanced phone jack (360 mV/no load), XLR balanced output (+/-24mV/600ohm load)
LED Indicators: Power on, diversity A/B, audio peak
Unwanted Signal Rejection: 60dB image and spurious
Power Requirements: 18Vdc at 250mA, AC/DC adapter included
Dimensions: 1.75 x 7.5 x 8.1 inch
Antenna: 11.2-inch, dual telescopic
UB-3 Bodypack Audio Inputs: 3.5mm locking mini-jack, 3-way select switch for inputs instrument, headworn mic or lavalier mic
UH-3 Handheld Audio Inputs: Integral Nady DM-10D neodymium dynamic cartridge
UB-3 Controls: Power/mute on/off, instrument/headworn mic/lav mic, input level
UH-3 Controls: Power/mute on/off
UB-3 LED Indicator: Bicolor, unit on (green), low battery alert (orange)
UH-3 LED Indicator: Unit on (single flash), low battery alert (steady)
RF Power Out: 50 mW
Harmonic and Spurious Emissions: <–50 dB
UH-3 Battery: AA Alkaline (2x)
UB-3 Battery: AAA Alkaline (2x)
UH-3 Battery Life: 8 to 10 hours
UB-3 Battery Life: 4 to 5 hours
UB-3 Bodypack Dimensions: 3.25 x 2.187 x 1 inch
UH-3 Handheld Dimensions: 2x 9 inch

Low UHF Band Professional Wireless System 140 kb - Other

Project List

PCC-1E
Road Case for Encore Series, UHF-3, UHF-4 and WS-16U Wireless Systems

Request Quote

Find a Dealer

Suggested Products

560-596 MHz Bodypack Transmitter

by Electro-Voice

2-channel UHF Wireless Beltpack Transceiver with A4M Headset Connector

by RTS

16-channel Broadcast Wireless IFB Talent Receiver

by RTS