W-DMX BlackBox R-512 with 90 to 260V AC High Voltage Input

Model: W-DMX BlackBox R-512

Full compliance with USITT DMX-512 (1990) & 512-A standards
Maximum number of transceivers on a single bus: 32 (compliant with the EIA/TIA RS-485 standard)
Data Rate: 250 kbps (slew rate limited to minimise EMI)
Electrostatic discharge protection: ±15kV
DMX frame rate and frame size: Auto sensing

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The W-DMX BlackBox R-512 indoor receiver is the original BlackBox R-512 user-friendly receiver with “One-Button-2-Go” technology. The R-512 receives all 512 channels (one universe) DMX wireless through the W-DMX technology that is proven to be safe, reliable and easy to use. W-DMX BlackBox R-512 can be used for both Multicasting and Point-to-Point systems. In a Multicast system, each DMX512 device has its own BlackBox R-512, which negates the need for DMX512 cable as the entire system is wireless. In a Point-to-Point situation, W-DMX is used to ‘bridge’ a distance. The W-DMX BlackBox R-512 has a built in universal power supply with 90-250V guaranteed worldwide use without problems.

Full compliance with USITT DMX-512 (1990) & 512-A standards
Maximum number of transceivers on a single bus: 32 (compliant with the EIA/TIA RS-485 standard)
Data Rate: 250 kbps (slew rate limited to minimise EMI)
Electrostatic discharge protection: ±15kV
DMX frame rate and frame size: Auto sensing
Frame rate: 1 (min) to 44 (max) frames per second
Frame size: 1 (min) to 512 (max) channels
Loss of DMX input or radio link: After one second (if there is no resumption), the DMX output will cease to transmit and go into a high impedance mode
Recovery from loss of DMX input or radio link: Less than 1 second

Spec Sheet available - Yes

High voltage input: 90 to 260V AC
Low voltage input: 12V DC (R-512 Pro: 12 to 24V DC)
Average Current: 200mA at 12VDC
Battery operation (R-512 Pro only): 2 hours operation from fully charged
Operational frequency range: 2402 to 2479MHz (ISM band)
EU/ASIA RF output power: 20dBm or 100mW
FCC RF output power: 25dBm or 275mW
Channel Bandwidth: 1 MHz
Sensitivity at 0.1% packet error rate: 95 dBm
Enclosure: Diecast aluminium casing
Operating temp range - R-512: 0 to +55 °C (32 to 131°F)
Operating temp range - R-512 Pro: -20 to +55 °C (-4 to 131°F)
AC Voltage (Maximum): 260 Volts
AC Voltage (Minimum): 90 Volts
Current Draw: 0.20 Amps
DC Voltage: 12 Volts

W-DMX BlackBox 387 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

LCP 339N Lighting Control Panelboard, Narrow/Column Width, 3Ø, 4 wire, 208Y/120Vac, 225A Main, Holds 39 breakers, Controls up to 165 breakers. Includes LCP controller in separate enclosure.

by LynTec

RPC 341N Remote Power Control Panel, Narrow/Column Width, 3Ø, 4 wire, 208Y/120Vac, 225A Main, Holds 41 breakers, Controls up to 167 breakers

by LynTec

LCP 327N Lighting Control Panelboard, Narrow/Column Width, 3Ø, 4 wire, 208Y/120Vac, 100A Main, Holds 27 breakers, Controls up to 152 breakers. Includes LCP controller in separate enclosure.

by LynTec