2-way Microphone Splitter Module with Phantom

Model: DIN-MS-2P

Provides additional, isolated balanced output as mic splitter
Solves transformerless preamp RFI and CMRR problems
High common-mode rejection of 130dB at 60Hz
Excellent frequency response and time domain performance
Provides support circuitry for phantom powered microphones

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

2-way microphone splitter module with phantom. This module is designed to be driven from a 150 ohm microphone source and loaded by the typical 1kohm input impedance of microphone preamplifiers. It can be used with balanced or unbalanced sources and/or loads since both primary and secondary are fully balanced. A 30dB magnetic shield package is standard.

Provides additional, isolated balanced output as mic splitter
Solves transformerless preamp RFI and CMRR problems
High common-mode rejection of 130dB at 60Hz
Excellent frequency response and time domain performance
Provides support circuitry for phantom powered microphones

Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F
Input Impedance: 1.08 ohm (1kHz, -20dBu, test circuit 1)
Voltage Gain: -0.82 dB (1kHz, -20dBu, test circuit 1)
Magnitude response, ref 1kHz: -0.09 (20Hz, -20dBu, test circuit 1) and -0.10 (20kHz, -20dBu, test circuit 1) dB
Deviation from linear phase (DLP): +1.7/-0 degree (20Hz to 20kHz, -20dBu, test circuit 1)
Distortion (THD): <0.001 (1 kHz, -20dBu, test circuit 1) and 0.036 (20Hz, -20dBu, test circuit 1) %
Maximum 20Hz output level: +2.0 dBu (1% THD, test circuit 1)
Common-mode rejection (CMRR) ratio: 130 (60Hz, test circuit 2) and 95 (3kHz, test circuit 2) dB
Output Impedance: 250 ohm (1 kHz, test circuit 1)
DC Resistance: 50 primary (pin 4 to pin 5) and 50 secondary (pin 8 to pin 9) ohm
Capacitance: 75 (primary to shield and case) and 87 (secondary to shield and case) pF
Turns Ratio: 1:1.000 (any winding to any other winding)
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60 Hz, 1 minute test duration

Splitter Module 201 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

32-port Integrated Switching Fabric with 600Gbps Bandwidth

by Evertz

64-port Integrated Switching Fabric with 1.2Tbps Bandwidth

by Evertz

Impera SR-4 Switching Relay

by Biamp