Signal Processing Systems : Video Processors : Evertz - 7732DVP-3D-HD

3D HD Video Processor

Model: 7732DVP-3D-HD

Two serial digital 1.5Gb/s HD inputs per SMPTE ST 292-1
Three serial digital 1.5Gb/s HD outputs per SMPTE ST 292-1
Supports most international standards including 1080i/60, 1080i/59.94, 1080i/50, 1080p/24sF, 1080p/23.98sF, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 720p/60, 720p/59.94, 720p/50
Horizontal flip can be applied to left or right eye input
Programmable left or right horizontal shift can be applied to either left or right eye inputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7732DVP-3D-HD Video Processor module is a multi-purpose module designed specifically to aid in the production and post production of 3D high definition video productions. This 7700 series module provides for Left eye and Right eye inputs and processed outputs. In addition it also provides a mix output that is a combination of the left eye and right eye. The 7732DVP-3D-HD occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Two serial digital 1.5Gb/s HD inputs per SMPTE ST 292-1
Three serial digital 1.5Gb/s HD outputs per SMPTE ST 292-1
Supports most international standards including 1080i/60, 1080i/59.94, 1080i/50, 1080p/24sF, 1080p/23.98sF, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 720p/60, 720p/59.94, 720p/50
Horizontal flip can be applied to left or right eye input
Programmable left or right horizontal shift can be applied to either left or right eye inputs
Programmable up or down vertical shift can be applied to either left or right eye inputs
Mix output provides a processed combination of the left and right eyes in the following modes -50/50 linear mix, left - right difference, horizontal 50/50 split
Left and right eye source ID embedded in ATC user bits on left and right eye outputs - requires 7760AVM2-HD+SID decoder card to view the source ID codes
8 Programmable GPI control inputs - select mix modes, adjust horizontal and vertical shift
Card edge menu using OSD on Mix output to configure the operating modes
Card Edge LEDs for signal presence, module status

Processor Type - Video
Spec Sheet available - Yes

Serial Video Inputs - Standard 1.485Gb/sec SMPTE ST 292-1 - auto-detects standard SMPTE ST 274, SMPTE ST 296 -1080i/60, 1080i/59.94, 1080i/50, 1080p/24sF, 1080p/23.98sF, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 720p/60, 720p/59.94, 720p/50:
Serial Video Inputs - Number of Inputs: 2
Serial Video Inputs - Connector: BNC per IEC 61169-8 Annex A.
Serial Video Inputs - Input Equalization: Automatic to 65m @ 1.5Gb/s with Belden 1694 or equivalent cable
Serial Video Inputs - Return Loss: >12 dB up to 1.5GHz
Serial Video Outputs - Standard: Same as input
Serial Video Outputs - Number of Outputs: 2 Program, 1 Mix
Serial Video Outputs - Connector: BNC per IEC 61169-8 Annex A
Serial Video Outputs - Signal Level: 800 mV nominal
Serial Video Outputs - DC Offset: 0±0.5 V
Serial Video Outputs - Rise and Fall Time: 200 ps nominal
Serial Video Outputs - Overshoot: <10% of amplitude
Serial Video Outputs - Return Loss: >15 dB at 1.5Gb/s
Serial Video Outputs - Jitter: <0.16 UI (HD)
GPIO Control Port - Number of Inputs: 8
GPIO Control Port - Type: Opto-isolated, active low with internal pull-ups to +5 or +12V (jumper settable)
GPIO Control Port - Connector: 9 pin female D
GPIO Control Port - Signal Level: closure to ground
Input to Output Processing Delay - HD Input Video: 2 lines
Electrical Power: 10 Watts
Physical Number of Slots: 1
DC Voltage: 12 Volts
Regulatory Compliance: Complies with FCC regulations for class A devices Complies with EU EMC directive

Video Processor 52 kb - Data Sheet

Project List

Find a Dealer