Signal Routing / Switching : Switchers : Evertz - 7702BPX-LB-S50

2 x 1 RF Protection Switch for L-Band Frequencies, 50 Ohm SMA Connectors

Model: 7702BPX-LB-S50

Intelligent auto switching with input power detection
User definable threshold levels on 7703BPXA-LB version
Maintains switch state and RF channel on loss of power to card or frame
Supports automatic or manual control via GPI or SNMP on 7703BPXA-LB
Switch state indication via GPO

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7702BPX-LB-S50 L band 2 x 1 protection switches provide automatic changeover functionality to provide bypass protection for RF signals from 950MHz to 2250MHz. The 7702BPX-LB-S50 occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Intelligent auto switching with input power detection
User definable threshold levels on 7703BPXA-LB version
Maintains switch state and RF channel on loss of power to card or frame
Supports automatic or manual control via GPI or SNMP on 7703BPXA-LB
Switch state indication via GPO
Card edge LEDs indicate active input channels, output channel and power levels below threshold
Fully hot swappable from front of frame
Wide operating frequency range, 950MHz - 2250MHz
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capable on 7703BPXA-LB version

Spec Sheet available - Yes

RF I/O Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
RF I/O I/O Impedance: 75 ohm (50 Ohm optional)
RF I/O Frequency Response(< ±1.5dB): 950 to 225 MHz
RF I/O Insertion Loss(950MHz-1450MHz): < 4 dB
RF I/O Insertion Loss(950MHz-2250MHz): <5 dB
RF I/O Return Loss: > 10 dB
RF I/O Isolation: > 45 dB
RF I/O Input Power Range: 0 to -50 dBm
General Purpose Input Type: Opto-isolated, active low with internal pull-ups to +5V
General Purpose Input Connector: 2 pins plus ground on 6 pin terminal strip
General Purpose Input Signal Level(+5V Pullup): Low: -5V to +2.5V DC, High: 3.5V to 10V DC
General Purpose Input Signal Level(+12V Pullup): Low: -5V to +9.5V DC, High: 10.5V to 15V DC
Maximum Sink Current: 15 mA (input shorted to ground)
Maximum Leakage Current for Input High: 200 microAmps
General Purpose Output Type: "Dry Contact" relay contacts - normally open & normally closed contact provided
General Purpose Output Connector: 3 pins on 6 pin terminal strip
Number of Slots: 1
Input Impedance: 75 ohm
Number of Inputs: 2
Number of Outputs: 1
Output Impedance: 75 ohm
Active Power: 4 Watt
DC Voltage: 12 Volts

Switch 53 kb - Data Sheet

Project List

Find a Dealer