Signal Processing Systems : Distribution Amplifiers : Evertz - 500DA-HD-N

1 x 8 HD/SD-SDI Non-Reclocking Distribution Amplifier

Model: 500DA-HD-N

Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
Jumper Selectable mode for DVB-ASI
Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
Fully hot-swappable from front of frame with no BNC disconnect required
Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Evertz 500DA-HD-N Non-Reclocking Distribution Amplifier provides reliable distribution of your HD and sd SDI video signal at rates of 1.5Gb/s and 143Mb/s to 540Mb/s. The DA features an auto-equalized input with eight serial outputs. The 500DA-HD-N has been designed for use as a SMPTE ST 292-1 (1.5Gb/s), DVB-ASI, SMPTE ST 259, or SMPTE ST 310 distribution product. The 500DA-HD-N DAs are housed in the 3RU 500FR frame that will hold up to 16 modules.

Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
Jumper Selectable mode for DVB-ASI
Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
Fully hot-swappable from front of frame with no BNC disconnect required
Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
Tally output on Frame Status bus upon loss of input signal for quality monitoring
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller

Spec Sheet available - Yes

Standard: SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (143 to 360Mb/s), SMPTE ST 344 (540Mb/s), DVB-ASI
Connector: BNC per IEC 61169-8 Annex A
Equalization: Automatic to 110m @ 1.5Gb/s with Belden 1694A (or equivalent); Automatic to 350m @ 270Mb/s with Belden 1694A (or equivalent)
Return Loss: > 15dB up to 1.0Gb/s; > 10dB up to 1.5Gb/s
Number of Outputs: 8 (optionally reclocked)
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot: < 10% of amplitude
Wideband jitter: < 0.2UI
Voltage: +12V DC
Power: 5 Watts
EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
Number of Slots: 1

HD/SD-SDI Reclocking & Non-Reclocking Distribution Amplifier 56 kb - Data Sheet

Project List

Find a Dealer