The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 10 inches from the floor or anywhere in between, depending on the model. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.
Matched pair
Uniform frequency response on or off axis
Frequency response of 30Hz to 30kHz
Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
Large flex section near the center of the stand that couples the stand and the wand
Mini-gooseneck between the end of the wand and the microphone head
Substantial improvement in gain before feedback
They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over
Made in USA
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Cardiod
Polar/Pickup Pattern - Hypercardiod
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
30000 Hz
Minimum Frequency Response (Bandwidth):
0.03 kHz
Impedance:
100 ohm
Maximum SPL (Sound Pressure Level):
145 dB
Sensitivity:
-40 dBV
Current Draw:
0.01 Amps
DC Voltage:
48 Volts
Color:
Black
Noise:
16 dB
Product Weight:
lbs
Minimum Frequency Response (Bandwidth):
30 Hz
Maximum Frequency Response (Bandwidth):
30 kHz
Signal to Noise Ratio:
dB
FW430/HC-TPB
- Hypercardioid 4.7 ft model with tripod base - 30Hz to 30kHz in black only
FW430/HC-TPBmp
- Hypercardioid 4.7 ft model with tripod base - matched pair in black only
FW430TPB
- Cardioid 4.7 ft model with tripod base - 30Hz to 30kHz in black only
FW430TPBmp
- Cardioid 4.7 ft model with tripod base - matched pair in black only
FW730/HC
- Hypercardioid 7 ft model - 30Hz to 30kHz in black only
FW730/HC-TPB
- Hypercardioid 7 ft model with tripod base - 30Hz to 30kHz in black only
FW730TPB
- Cardioid 7 ft model with tripod base - 30Hz to 30kHz in black only
FW730TPBmp
- Cardioid 7 ft model with tripod base - matched pair in black only
SRW3
- Foam Windscreen for all old style FlexMics (without metal mesh windscreen) & SR25