H.264/AVC Encoder, Re-encoding YprPb, DVI, or CVBS Analog Feeds

Model: reCoder/IP

Input: YPbPr, DVI, or CVBS
Output: transport stream over IP (UDP)
Compliant with H.264/MPEG-4 AVC standard
AAC audio encoding or Dolby Digital® AC-3 passthrough
Encoding bit rates: 1 Mbps to 12 Mbps

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The reCoder/IP is a cost effective, remotely manageable, H.264/AVC encoder. It re-encodes YPrPb or composite analog feeds to IP and delivers them to IP set-top boxes, which convert the feeds to HDMI and send them to multiple television monitors. And because it encodes the feeds into H. 264, it uses less than 60% of the bandwidth of MPEG-2, with the same video quality. The system features automatic standards detection of SD or HD. It is designed specifically for re-encoding incoming video feeds from devices that provide analog video (component or composite) only.

Input: YPbPr, DVI, or CVBS
Output: transport stream over IP (UDP)
Compliant with H.264/MPEG-4 AVC standard
AAC audio encoding or Dolby Digital® AC-3 passthrough
Encoding bit rates: 1 Mbps to 12 Mbps
Configure and operate via web-based remote management
Constant Bit Rate (CBR)
Supports unicast or multicast
Tested to work with STB’s (set-top boxes)
Tested to work with Wowza® and Adobe® Flash® Encoder software
1 RU with mounting holes
Applications:
Encoding analog video for transmission over IP
IPTV unicasting or multicasting
Hotels, Restaurants, Resorts
Streaming to designated VideoLAN VLC, Mplayer, or Windows Media
Player clients, or to Amino™ or other set-top boxes
Reduce MPEG-2 distribution bitrate by up to 60% with no change in picture quality

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Streaming Decoder/Encoder
Warranty - Yes
IP Signals Supported - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 185 F
Operating Temperature (Minimum): -4 F
Certifications: UL, CSA, RoHS
ROHS Compliant: Yes
AC Voltage: 120 Volts
Depth: 14 in
Height: 1.70 in
Width: 19 in
Product Weight: 9 lbs
Regulatory Compliance: UL, CSA, RoHS
Warranty (Length/Type): 13 months
Input Signal Types: YPbPr, DVI, or CVBS
IP Signals Supported: Yes
Output (Decoded/Encoded) Signal Type: IP
Boot-up Time: 45 S
Latency: 750 ms
Resolutions: 1080i, 720p, 480p, 480i – 59.94 fps

reCoder IP H.264 Re-Encoder Datasheet 790 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

SMPTE 2110 and IPMX to HDMI Encoder/Decoder

by Matrox Video

Maevex 7112A Single-Channel 4K Encoder

by Matrox Video

Maevex MVX-E6152-4 Quad 4K Encoder

by Matrox Video