6000W 4-channel Power Amplifier, Ultra Lightweight, High Density

Model: NU4-6000

Delivers 4 x 1500 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms and weighs less than 12 lbs/5.5 kg
Ultimate reliability through revolutionary cool running high density class-D technology with near-zero thermal buildup
Ultra-efficient switch mode power supply for noise free audio, superior transient response and low power consumption
Zero-attack limiters offer maximum output level with reliable overload protection
Built-in subwoofer/satellite crossover for perfect subwoofer operation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

4-channel power amplifier with ultra efficient switch mode power supply, zero-attack limiters, built-in subwoofer/satellite crossover, precise 4 segment signal and limit LEDs. Back to front ventilation system prevents thermal buildup for reliable operation. All channels feature positive detent gain controls with signal LEDs that light when signal is present, as well as clip LEDs to indicate when signal is distorted and need to reduce the input signal.

Delivers 4 x 1500 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms and weighs less than 12 lbs/5.5 kg
Ultimate reliability through revolutionary cool running high density class-D technology with near-zero thermal buildup
Ultra-efficient switch mode power supply for noise free audio, superior transient response and low power consumption
Zero-attack limiters offer maximum output level with reliable overload protection
Built-in subwoofer/satellite crossover for perfect subwoofer operation
Detented and illuminated gain controls for precise level setting
Precise 4 segment signal and limit LEDs to monitor performance
XLR and ¼-inch TRS combination input connectors for compatibility with any source
Professional twist lock speaker connectors for ultimate reliability
Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier

4-Channel Maximum Output Power: 4 x 1600 W (2 Ohms per Channel)
Bridge Connection Maximum Output Power: 2 x 3000 W ( 4 Ohms per Bridged Pair)
System Front Controls: Power Switch Gain Controls (channels 1, 2, 3, and 4)
System Rear Controls: 2 x Mode Switch (Bridge/Stereo/Mono), 2 x Crossover Switch (Fullrange/100Hz)
Indicators Power: Amber Backlit Illuminated Gain Controls
Indicators Limit (per Channel): Red LED (0dB, Full scale)
Indicators Signal (per Channel): Amber LED (-24dB, -12dB, -6dB)
Connectors Inputs: 4 x Combo Jacks
Connectors Input Balanced Impedance: 20 kiloohms
Connectors Input Unalanced Impedance: 10 kiloohms
Connectors Outputs: 4 X Locking-Style Professional Speaker Connectors
Connectors Output Circuit Type: Class-D
Connectors Distortion: <0.2 %
Connectors Frequency Response at +0/-2dB: 20Hz to 20kHz
Connectors Damping Factor at 8 Ohms: >120
Connectors Signal to Noise: >100 dB
Circuit Cooling: Continuously Variable Speed Fan Back to Front Air Flow
Circuit Amplifier Protection: Thermal and DC Protection Stable into Reactive or Mismatched Loads
Circuit Load Protection: On/Off Muting, DC-fault Power Supply Shutdown
Power Consumption at 1/8 Maximum Non-clipped Output at 2 Ohms: 620 W
Power Consumption at Maximum Attainable Output at 2 Ohms: 4800 W
Power Supply Voltage at 60Hz: 120 V
Depth: 12.20 in
Height: 3.70 in
Product Weight: 12.40 lbs
Width: 19 in

Request Quote

Find a Dealer

Suggested Products

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

Vocia® VA-8600 Failover Module (VFOM-1)

by Biamp

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.