The AD8283 is designed for low cost, low power, compact size, flexibility, and ease of use. It contains six channels of a low noise preamplifier (LNA) with a programmable gain amplifier (PGA) and an antialiasing filter (AAF) plus one direct-to-ADC channel, all integrated with a single 12-bit analog-to-digital converter (ADC).
Each channel features a gain range of 16 dB to 34 dB in 6 dB increments and an ADC with a conversion rate of up to 80 MSPS. The combined input-referred noise voltage of the entire channel is 3.5 nV/?Hz at maximum gain. The channel is optimized for dynamic performance and low power in applications where a small package size is critical.
Fabricated in an advanced CMOS process, the AD8283 is available in a 10 mm × 10 mm, RoHS-compliant, 72-lead LFCSP. It is specified over the automotive temperature range of ?40°C to +105°C.
- 6 channels of LNA, PGA, AAF
- 1 channel of direct-to-ADC
- SPI-programmable gain = 16 dB to 34 dB in 6 dB steps
- Programmable third-order low-pass elliptic filter (LPF) from
- 1 MHz to 12 MHz
- Precise ch-to-ch matching
- Gain: ±0.5dB (-40 to 105°C)
- Phase: ±5° (-40 to 105°C)
- Low noise, 3.5 nV/?Hz maximum of input referred voltage noise
- Low power, 170 mW per channel at 12 bits/80 MSPS
- Parallel 3.3V CMOS Output
- Selectable Input Impedance: 200 ohms or 200kiloohms
- Qualified for automotive applications
- Applications
- Automotive Radar
- Adaptive cruise control
- Collision avoidance
- Blind spot detection
- Self-parking
- Electronic bumper
