The AND-BTN-KIT-1 is a vandal proof button kit. AND’s call button allows for most of AND’s devices to become intercoms for hands free, bidirectional communications. Connect the IP endpoint via SIP to your IP phone network and talk from office to classroom and classroom to office at the push of a button. Program the button to recognize two commands. Push to talk to the office; push and hold to connect to campus or district security. Once connected, simply talk into the embedded microphone that is found in most of AND’s devices.
Two Way Communication:
Activate via push button
Allows for full duplex hands free com¬munication
Includes all necessary wiring (2 pair 10ft 22AWG) and connectors to con¬nect to AND IP endpoints
Cabling can be easily extended to reach further than the allotted 10ft
Program up to two extensions or phone numbers, primary extension is dialed upon pushing the button
The secondary extension is dialed when the button is pushed and held
Device Requirements
Compatible with AND devices of MAC address 20:46:F9:03:00:00 or higher.
Use with PoE or PoE+ power source
Call Button
Faceplate diameters are for installation with any standard back box
Faceplate is 16 gauge polished stainless steel
Button diameter is .6” (15mm)
Circuit SPST
Switch function momentary on
2A at 48VDC power
200000 cycles electrical life
-20 to 55°C operating temperature
IP65 ingress protection
Installation depth 1” (25.4mm)
Screw type terminals
AND-PIA-2 Interface Adapter
Use 18-22 AWG stranded or solid core wire pair to connect button to peripheral interface board
Vandal proof screws included to increase security
The peripheral interface adapter (AND-PIA-2) makes any combination of the following signals available via two “poke-home” connectors on the board: