Model SA3 rechargeable glass is compatible with Samsung® 2010 Model LCD 3DTV’s (but not Plasmas), Mitsubishi® 3D A1 and 3DC 1000 adapter kits and with the 3DTV Corp® emitters in the orange blinking mode. Operation

Press black button in the top of the left temple to turn on. Green light appears 1.5 sec and then goes off. Press it again until green light blinks three times to turn off. Green light will blink every 3 sec when the battery is low. Glasses turn off in 2 min if no signal. TURN OFF EMITTER OR TV WHEN NOT IN USE OR PUT GLASSES IN A BOX OR THEY WILL CONTINUE TO OPERATE!!

Recharging

Pop up the rubber USB port cover on the bottom of the left temple. Insert the supplied USB cable and insert the other end into a pc, mac or any USB charging device. The red light will go off when charging is complete (ca. 2 hours when fully discharged).

Changing Right/Left Eye Polarity

If the 3D image looks strange use your TV or projector remote, or the switch on your remote or on the Mitsubishi 3DA-1 adapter to reverse the eyes.

Nosepads

Four different sized rubber nosepads are supplied as well as adhesive felt pads which can be applied to the nosepiece or temples for comfort. Liberal use of these pads will almost always remove any discomfort. They are the loop part of the Velcro found everywhere.